眾所周知，機械運動不同于人，機械運動在機械性能較高的情況下，高速有效的運動相對來說還比較容易實現。但是如果在低速運動中的話，因?yàn)闄C(jī)械本身的反應程度還有機械零部件的組成特性，會導致低速時候可能出現爬行的情況，而這種情況下就會出現精密度不夠高的現象。滾珠絲杠在低速的運動情況中也要保持平穩性，才能夠?qū)崿F(xiàn)適應多種生產環境的需求，所以導軌絲杠廠家提醒大家，也是要注意以下兩方面：

As is well known, mechanical motion is different from human motion. In situations where mechanical performance is high, high-speed and effective motion is relatively easy to achieve. However, if in low-speed motion, due to the reaction level of the machine itself and the composition characteristics of the mechanical components, crawling may occur at low speeds, and in this case, the precision may not be high enough. The ball screw also needs to maintain stability in low-speed motion to meet the needs of various production environments. Therefore, the guide rail screw manufacturer reminds everyone to pay attention to the following two aspects:

一、低速運動保持平穩性

1、 Maintaining smoothness during low-speed movements

在低速運動過程中，非常容易出現爬行的情況，這種時候就要考慮到低速運動過程中的平穩性還有導軌之間的潤滑程度問題。適當?shù)牡退龠\(yùn)動中，保持一定的摩擦力可以比較容易控制速度，有效提高精確度。

During low-speed movement, it is very easy to experience crawling, so it is necessary to consider the smoothness of the low-speed movement process and the degree of lubrication between the guide rails. In appropriate low-speed motion, maintaining a certain amount of friction can make it easier to control speed and effectively improve accuracy.

二、導軌的剛度

2、 The stiffness of the guide rail

導軌在外力的情況下會不會被影響到精度，這是一定要考慮到的。導軌的剛度如果不夠，會直接影響到平衡力，使得不能夠高能效的保持直線運動。為了彌補導軌的剛度問題，可以適當考慮加大導軌尺寸或者是其它一些輔助導軌提高剛度的方法。

It is important to consider whether the accuracy of the guide rail will be affected by external forces. If the stiffness of the guide rail is not sufficient, it will directly affect the balance force, making it unable to maintain linear motion with high energy efficiency. In order to compensate for the stiffness problem of the guide rail, it is appropriate to consider increasing the size of the guide rail or other auxiliary methods to increase the stiffness of the guide rail.

滾珠絲杠在低速過程的平穩性其實是確保其準確率的一個方法，在低速過程中，要確保導軌的剛度是否能夠適應那樣的環境需求。

The smoothness of the ball screw during the low-speed process is actually a method to ensure its accuracy. During the low-speed process, it is necessary to ensure that the stiffness of the guide rail can adapt to the environmental requirements.

另外就是低速運動中，適當考慮潤滑油的使用量，能夠有效輔助增加準確率，提高精準度，使得整個低速過程不會影響到產品的精密度。對此，您還有什么疑惑或者會需求，可以隨時來我們網站http://baoxianyingxiao.cn咨詢！

In addition, in low-speed motion, appropriate consideration of the amount of lubricating oil used can effectively assist in increasing accuracy and improving accuracy, so that the entire low-speed process does not affect the precision of the product. If you have any doubts or needs regarding this, please feel free to come to our website at any time http://baoxianyingxiao.cn consulting service